Description
Was previously called the CZ300/1 by the manufacturer
The CZ1237 series lathes are suitable for cutting, internal and external turning, facing slotting taper turning, metric thread-cutting and inch thread-cutting, etc.
*Note the shorter bed CZ1224 is shown in the photograph. The only difference being a shorter bed
| Model | CZ1237 | STANDARD ACCESSORIES |
| Swing over bed | 305mm | 1.motor pulley |
| Swing over gap | 480mm | 2.toolpost wrench |
| Swing over carriage | 173mm | 3.allen wrenched |
| Distance between centers | 940mm | 4.double end wrench |
| Diameter | 36mm | 5.change geares |
| Taper of spindle nose | M.T.5 | 6.3-jaw chuck |
| Taper of center | M.T.3 | 7.center sleeve |
| Step of speeds | 12 | 8.screw driver |
| Range of speeds(50HZ) | 50-1200 r.p.m. | 9.back plate |
| Range of speeds (60HZ) | 60-1440 r.p.m. | 10.centres |
| Thread of lead screw | 8T.P.I. | 11.oil gum |
| Metric threads can be cut | 0.25-7.5mm | 12.tool box |
| Inch threads can be cut | 4-112T.P.I. | 13.motor |
| Range of feed amount | 0.12-3.35mm/r. | 14.follow rest |
| Saddle travel | 850mm | 15.steady rest |
| Cross slide travel | 150mm | 16. Machine stand |
| Compound travel | 89mm | 17 4jaw-chuck |
| Barrel travel | 92mm | OPTIONAL EXTRAS |
| Taper of center | M.T.3 | 1.Face Plate |
| Voltage/frequency | As customer’s requirement | 2.drill chuck |
| Power | 1.5HP | |
| Packing size | 178×74×75cm | |
| Packing size of stand | 72×38×70cm | |
| Net/gross weight | 330kg/380kg | |
| Net/gross weight(stand) | 60kg/6.5kg |
